Building With Lime A Practical Introduction

This book is intended as a starting point for those considering lime as a building material, and as a general reference to the broad range of uses for lime in construction. It shows how to make the best use of different types of lime, whether extracted locally or transported from further afield.

Mortars, Renders and Plasters provides a broad perspective of contemporaryconservation theory and practice not otherwise found in one publication, describing the history,physical properties, and deterioration of these important materials. Methods of assessing condition and evaluating options for treatment and repair are discussed, together with a range of practical conservation techniques and maintenance strategies.

The original, complete, user-friendly introduction to natural building, now fully revised and updated The popularity of natural building has grown by leaps and bounds, spurred by a grassroots desire for housing that is healthy, affordable, and environmentally responsible. While there are many books available on specific methods such as straw-bale construction, cob, or timber framing, there are few resources which introduce the reader to the entire scope of this burgeoning field. Fully revised and updated, The Art of Natural Building is the complete and user-friendly introduction to natural building for everyone from the do-it-yourselfer to architects and designers. This collection of articles from over fifty leaders in the field is now stunningly illustrated with over two-hundred full-color photographs of natural buildings from around the world. Learn about: The case for building with natural materials, from the perspectives of sustainability, lifestyle, and health What you need to know to plan and design your own beautiful and efficient natural home Explanations of thirty versatile materials and techniques, with resources on where to go for further information on each How these techniques are being used to address housing crises around the world. Clearly written, logically organized, and beautifully illustrated, The Art of Natural Building is the encyclopedia of natural building. Joseph F. Kennedy is a designer, builder, writer, artist, educator, and co-founder of Builders Without Borders. Michael G. Smith is a respected workshop instructor, consultant, and co-author of the best-selling book The Hand-Sculpted House . Catherine Wanek is a co-founder of Builders Without Borders and author/photographer of The Hybrid House and The New Straw Bale Home .

This bestselling book has been fully revised and updated to include valuable new case studies and examples which help to demonstrate the common problems found in older buildings. It features many additional photographs illustrating the decay mechanims and individual issues associated with damp, timber decay, masonry defects, roofing problems and many other aspects. The book begins by summarizing the basics of surveying practice, including the inspection, assessment, defect diagnosis and monitoring of defects. It then examines the building elements, discussing their construction, typical faults and their diagnoses. This section provides specific advice on assessing industrial monuments and features concise inspection checklists for ease of reference. In the final section, the author looks to the future, considering the specific challenges faced by property professionals when employed to survey historic buildings. The book is accompanied by comprehensive appendices, including sample survey forms, and a list of useful contacts is followed by an extensive bibliography. This book will be of particular interest to conservation officers, surveyors, architects, archaeologists and planners.

Sustainable building from the ground up - the pros and cons of the latest green and natural materials and technologies From foundation to finish, a wealth of information is available on sustainable construction methods-entire volumes have been published on individual green and natural building techniques. But with so many different ideas to choose from, there is no single resource that allows an owner or builder to quickly and objectively compare the merits of each system for their particular project. Making Better Buildings cuts through the hype and provides the unvarnished facts about the upsides and downsides of the most widely discussed materials and technologies. Drawing on the real-world experiences of designer/builders, this comparative guide systematically and comprehensively examines each approach in terms of: Cost, sourcing, labor intensity, and ease of construction Energy efficiency, embodied energy, and environmental impacts Availability/accessibility Viable applications and future potential. Each chapter is rounded out by a chart which summarizes the material in a quick and accessible manner. Whether you are an owner preparing to build a green or natural home, or a conventional contractor determined to integrate sustainable alternatives into your existing construction practices, this up-to-the minute resource will help you make the best decisions for your project, while meeting your energy, efficiency, budgetary, and site-specific needs.

This classic reference has established the value of petrography as a powerful method for the investigation of concrete as a material. It provides an authoritative and well-illustrated review of concrete composition and textures, including the causes of defects, deterioration, and failure that can be identified using a petrological microscope. This new edition is entirely revised and updated and also greatly extended to take account of new scientific developments and significant improvements in instrumentation and to reflect current laboratory working practices, as well as to reflect new understanding of the performance of concrete and related materials. Now in full color throughout, Concrete Petrography, Second Edition provides case study examples, with appropriate explanatory discussions and practical advice on selecting, handling and preparing specimens. It assists and guides the engineer, the trainee and the experienced petrographer in understanding the scientific evidence that is basic to petrographic analysis and so will lead to more accurate and timely diagnosis and treatment of problems in structural concrete. This book includes: Contributions in specialist areas by internationally recognized experts Explanation of computer techniques as an aid to petrography Full coverage of inspection, sampling, and specimen preparation New sections covering recent technological development of equipment Guidance on observation of cement and concrete mineralogy and microfabrics Discussion and illustrative examples of deterioration and failure mechanisms New work and guidance on the determination of water/cement ratio New color illustrations and micrographs throughout Thorough updating of standards, other authoritative publications, and references A fully revised, extended, and updated glossary of optical and other properties

Building pathology provides an interdisciplinary approach to the study of defects and performance in order to develop appropriate remedial and management solutions. It considers how the structure and materials of a building relate to its environment, its occupants and the way the building is used, so as to develop a better understanding of building failures. This book provides a well illustrated introduction to the discipline of building pathology, bridging the gap between current approaches to the surveying of buildings and the detailed study of defect diagnosis, prognosis and remediation. It features a number of case studies and a detailed set of references and further reading. This second edition has been updated to reflect changes in legislation, guidance and construction, and provides new case studies that demonstrate the breadth and depth of the subject.

This book provides guidance on building survey work for typical residential, commercial and industrial buildings, with advice on how to diagnose a wide range of defects. It considers both modern and older construction methods, together with new and traditional materials. The particular problems of alteration and renovation work are discussed, with guidance on how to carry out measured surveys. A separate chapter covers survey problems after flood and fire damage, and the legal section takes account of recent developments in case law relating to inspections and surveys of properties. This new edition continues to provide a thorough treatment of all the key issues relating to surveying buildings, dealing with the problems that surveyors are likely to encounter when inspecting buildings. Changes for the new edition include: Examples and references have been updated Evaluation of condition rating systems for domestic and commercial buildings A new section on the home condition reports More information on slate defects Bibliography revised and expanded, to make it more comprehensive Additional appendix showing the home condition report format

Buildings with load-bearing earth walls were once widespread throughout Britain and many thousands still survive, including some dating from the fourteenth and fifteenth centuries. Earth is the ultimate form of ‘green’ building construction, creating no environmental pollutions and consuming virtually no energy. Subsoil can be dug from or near the site to construct buildings that will meet modern needs and conform to the latest building regulations. This book describes all aspects of earth building, explaining how earth performs as a building material and providing guidance on how best to repair and conserve existing earth buildings.

Natural buildings not only bring satisfaction to their makers and joy to their occupants, they also leave the gentlest footprint on the environment. In this complete reference to natural building philosophy, design, and technique, Jacob Deva Racusin and Ace McArleton walk builders through planning and construction, offering step-by-step instructions on: siting and site analysis choosing materials integrating basic structural considerations into a design strategies for heating/cooling efficiency and moisture management planning for acoustics developing an integrative design navigating budgeting, code compliance, and project management creating the foundation, wall system, roof, and floors selecting and making plasters and paints evaluating options for mechanical and utility systems protecting against fire and insects integrating structures within landscape, climate, and human communities ...and more Applicable to building in climates that are cold and wet, hot and dry, or somewhere in-between, The Natural Building Companion provides the tools necessary to understand basic principles of building science, including structural and thermal engineering, and hydrodynamics. This guide offers thorough, up-to-date, and advanced installation details and performance characteristics of straw-bale, straw-clay, woodchip-clay, and cellulose wall systems, as well as earthen and stone wall systems and a variety of framing, roofing, flooring, mechanical system, and finishing options. This fully-illustrated volume informs professionals making the transition from conventional building, homeowners embarking on their own construction, or green builders who want comprehensive guidance on natural-building options. A State-of-the-Art Resource for Natural Builders The Natural Building Companion is a part of The Yestermorrow Design/Build Library and includes an instructional DVD.

Building defects still continue to plague the construction industry. The lessons learned over the last forty years have not been fully applied. Many new or refurbished buildings still leak or crack. Lack of awareness by designers and installers as to the main mechanisms that trigger such failures remains a problem for the industry. Investigating and rectifying building failures form a major part of building surveyors’ bread and butter work. This book provides guidance on this work for typical residential, commercial and industrial buildings – with advice on how to diagnose a wide range of defects with an emphasis on evidence based practice throughout. It considers both modern and older construction methods, together with new and traditional materials. The particular problems of alteration and renovation work are also discussed. The first four chapters provide information and guidance on the methodology for investigating failures – how to prepare for and conduct an investigation into a building defect and subsequently diagnose its cause in a logical manner. This fourth edition has been updated and expanded to cover the latest diagnostic procedures and research. It also includes Appendices and a new Bibliography, and provides an extensive list of books on building pathology and related topics in the UK and North America. It is essential reading for all students and practitioners interested in building surveying and building conservation.

This book deals with structural surveys for all types of building - domestic industrial and commercial - and includes diagnosis of a wide range of defects. It considers both modern and older construction methods, and deals with the particular problems of alterations and restoration work. Guidance is given on how to carry out measured surveys and on report writing. The third edition covers the latest definitions of types of property surveys, more information on report writing and a range of detail updates. * Covers all types of building - commercial, industrial and historical - not just domestic * Deals with particular problems of conversion and renovation work - increasingly important today * New edition features latest definitions of survey types, more on report writing and a range of other updates * ‘a valuable reference book’ - ASI Journal

The Ecology of Building Materials explores key questions surrounding sustainability of building materials. It provides technical data to enable design and building professionals to choose the most appropriate materials for a project: those that are least polluting, most energy efficient, and from sustainable sources. The book also gives information and guidance on a wide range of issues such as recycling, detailing for increased durability and Life Cycle Analysis. Berge’s book, translated from the Norwegian by Chris Butters and Filip Henley, offers safe and environmentally friendly material options. It provides an essential and easy-to-use reference guide to this complex subject for the building industry professional. New to this edition: • Thorough exploration of building materials in relation to climate change issues • Extensive updating of basic data, as well as the introduction of a wide range of new materials • Methods for recycling and reuse of materials • More information on the interaction between materials and the indoor environment, ventilation and energy use • Full colour text and user-friendly larger format Bjørn Berge is a practicing architect, researcher and lecturer. Since the 1970s, he has written several books on building ecology for the Scandinavian public. He is one of the founders of Gaia Architects who have developed a wide range of pioneering techniques in sustainable building.

A necessary purchase for level 1 and 2 undergraduates studying building/ construction materials modules, Materials for Architects and Builders provides an introduction to the broad range of materials used within the construction industry and contains information pertaining to their manufacture, key physical properties, specification and uses. Construction Materials is a core module on all undergraduate and diploma construction-related courses and this established textbook is illustrated in colour throughout with many photographs and diagrams to help students understand the key principles. This new edition has been completely revised and updated to include the latest developments in materials, appropriate technologies and relevant legislation. The current concern for the ecological effects of building construction and lifetime use are reflected in the emphasis given to sustainability and recycling. An additional chapter on sustainability and governmental carbon targets reinforces this issue.

As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.