Titanium Powder Metallurgy

Titanium Powder Metallurgy
Author: Ma Qian,Francis H. Froes
Publsiher: Butterworth-Heinemann
Total Pages: 648
Release: 2015-02-10
Genre: Technology & Engineering
ISBN: 9780128009109

Download Titanium Powder Metallurgy Book in PDF, Epub and Kindle

Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. Includes a critical review of the current key fundamental and technical issues of Ti PM. Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys

Titanium Powder Metallurgy and Additive Manufacturing

Titanium Powder Metallurgy and Additive Manufacturing
Author: Huiping Tang,Ma Qian,Yong Liu,Peng Cao,Gang Chen
Publsiher: Trans Tech Publications Ltd
Total Pages: 284
Release: 2018-05-11
Genre: Technology & Engineering
ISBN: 9783035731637

Download Titanium Powder Metallurgy and Additive Manufacturing Book in PDF, Epub and Kindle

Powder metallurgy of titanium and titanium alloys has been increasingly attracting attention of engineers and researchers for over four decades and the 4th International Conference on Titanium Powder Metallurgy & Additive Manufacturing (PMTi 2017, Xi’an, China, from 8 to 10 September 2017) was an event that promoted the progress in this area of the materials science and processing technologies.

Powder Metallurgy of Titanium

Powder Metallurgy of Titanium
Author: Ma Qian
Publsiher: Trans Tech Publications Ltd
Total Pages: 350
Release: 2012-08-24
Genre: Technology & Engineering
ISBN: 9783038138846

Download Powder Metallurgy of Titanium Book in PDF, Epub and Kindle

The conference upon which this work is based fully achieved its objectives and turned out to be the largest international gathering dedicated solely to the topic of titanium processing via powder metallurgy. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 50 peer-reviewed papers are grouped into 8 chapters: PM titanium alloy design and processing developments; Powder Production; Effect of Impurities; Metal Injection Moulding of Titanium; Biomedical Titanium Alloys; Titanium Composites; Forging and Equal-Channel Angular Pressing of Titanium; Laser Cladding, Welding, Slip Casting and Other Processing Developments.

Powder Metallurgy of Titanium Alloys

Powder Metallurgy of Titanium Alloys
Author: F. H. Froes,John E. Smugeresky
Publsiher: Unknown
Total Pages: 314
Release: 1980
Genre: Powder metallurgy
ISBN: STANFORD:36105030226950

Download Powder Metallurgy of Titanium Alloys Book in PDF, Epub and Kindle

Advances in powder metallurgy

Advances in powder metallurgy
Author: F.H. Froes
Publsiher: Elsevier Inc. Chapters
Total Pages: 624
Release: 2013-08-31
Genre: Technology & Engineering
ISBN: 9780128088609

Download Advances in powder metallurgy Book in PDF, Epub and Kindle

The major reason that there is not more widespread use of titanium and its alloys is the high cost. In this paper, developments in one cost effective approach to fabrication of titanium components – powder metallurgy – is discussed with respect to various aspects of this technology. These aspects are the blended elemental approach, prealloyed techniques, additive layer manufacturing, metal injection molding, spray deposition, far from equilibrium processing (rapid solidification mechanical alloying and vapor deposition) and porous materials. Use of titanium powder for sputtering targets, coating, as a grain refiner in aluminium alloys and fireworks are not addressed.

Titanium Alloys

Titanium Alloys
Author: Maciej Motyka,Waldemar Ziaja,Jan Sieniawski
Publsiher: BoD – Books on Demand
Total Pages: 154
Release: 2019-11-27
Genre: Technology & Engineering
ISBN: 9781839625527

Download Titanium Alloys Book in PDF, Epub and Kindle

Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.

Advances in Powder Metallurgy

Advances in Powder Metallurgy
Author: Isaac Chang,Yuyuan Zhao
Publsiher: Elsevier
Total Pages: 624
Release: 2013-08-31
Genre: Technology & Engineering
ISBN: 9780857098900

Download Advances in Powder Metallurgy Book in PDF, Epub and Kindle

Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques

Powder Metallurgy of Titanium II

Powder Metallurgy of Titanium II
Author: Thomas Ebel,Florian Pyczak
Publsiher: Trans Tech Publications Ltd
Total Pages: 442
Release: 2016-08-12
Genre: Technology & Engineering
ISBN: 9783035700091

Download Powder Metallurgy of Titanium II Book in PDF, Epub and Kindle

This book comprises 49 papers presented by international experts from 25 countries on the conference PM Titanium 2015 in Lüneburg, Germany. It gives a comprehensive overview on the technical and scientific status in the field of powder metallurgy of titanium and titanium alloys and points out the most important current research topics in this emerging area. The content covers powder production technologies, processing techniques like additive manufacturing, spark plasma sintering and metal injection moulding, specific application fields like biomaterials and special alloys, microstructures and properties. The conference was the third one of a series of biennial conferences on Powder Pressing, Consolidation and Metallurgy of Titanium, initiated 2011 in Brisbane, Australia.